Skip to content

A quick test drive of Glove80


  1. Plug in the USB cable to the left half of your Glove80
  2. Plug in the other side of the USB cable to a host, such as a PC
  3. Switch on both the left and right halves of Glove80 by pushing in the power button on each half
  4. Start typing

If all goes well you should see the keystrokes showing on the host.

Your Glove80 is shipped with its battery partially charged for safety during transport. We recommend fully charging both halves before using Glove80, which takes 4 hours. Sometimes the battery may have depleted during storage and shipping, in which case please charge the batteries on both halves before the test drive.