Go60 User Guide

Date: 28 Dec 2025

Table of Contents

• Introduction
  • Goals and key features of Go60
  • What’s in the box?
  • A look at Go60
• A quick test drive of Go60
• Typing with Go60
  • Getting started
  • Setting up Go60 for comfortable typing
  • Key position naming convention
  • Default key layout
  • Indicators
• Trackpad
  • Capabilities
  • Factory default layout
  • Programming the Trackpads in the Layout Editor
  • Adjusting sensitivity of the Trackpads
• Connecting Go60 with host devices
  • Introduction
  • Selecting BT Profile and USB-connected device
  • Pairing with a BLE host
  • Unpairing from a BLE host
  • Unpairing from all BLE hosts
  • BT Indicators
  • ZMK USB/BT Output Fallback Mechanism
  • Advanced usage: temporarily disconnecting an active BLE connection
• Wired and wireless split
  • Powering the right half from the left half
  • Communication between the two Go60 halves
  • Wired-only firmware
• RGB
  • Configuring the RGB underglow
  • Battery saving
• Battery-powered operation
  • Charging
  • Battery charging status and battery level
  • Battery saving with RGB Underglow
  • Disconnecting and removing Go60 batteries
• Customizing key layout and swapping keycaps
  • Customizing key layout
  • MoErgo Layout Editor
  • Loading new ZMK firmware onto your Go60
  • Putting Go60 into Bootloader for firmware loading
  • Replacing keycaps to match key layout
• Tenting Go60
  • Benefits of tenting
  • How to adjust the tenting angle
  • How to travel with tenting bar
  • Further customization of tenting angle
• Key switch hotswapping
  • Procedure to change keyswitch
• Troubleshooting
  • Troubleshooting FAQs
  • Configuration factory reset and re-pairing left and right halves
• Appendix: Technical Specification
• Appendix: ZMK
  • Creating a ZMK config repo and building ZMK firmware the “traditional way”
• Appendix: Optional Go60 Palm Rest
  • Introduction
  • What's in the box?
  • A look at the palm rest components
  • How to use the Go60 Palm Rest
  • Travelling with Go60 Palm Rests
  • Care procedure for the natural walnut palm rest
• Appendix: Optional mounting puck
• Appendix: Compliance and Certifications
  • USA
  • Canada