Skip to content

A quick test drive of Go60

Procedure:

  1. Remove the two halves of Go60 from the hard case

Go60 in hard case

  1. Plug in the USB cable to the left half of your Go60

Go60 with USB cable plugged in left half

  1. Plug in the other side of the USB cable to a host, such as a PC
  2. Switch on both the left and right halves of Go60 by pushing in the power button on each half
  3. Start typing

If all goes well you should see the keystrokes showing on the host.

Your Go60 is shipped with its battery partially charged for safety during transport. We recommend fully charging both halves before using Go60, which takes 6-8 hours. Sometimes the battery may have depleted during storage and shipping, in which case please charge the batteries on both halves before the test drive.